FREE Pair of GP Machined dual amplifier inputs with purchase.
|Frequency Response||15-270 Hz|
|Number of the channels||1|
|1 Ohm RMS Power (14.4 V)||2000 W|
|2 Ohm RMS Power (14.4 V)||1400 W|
|4 Ohm RMS Power (14.4 V)||800 W|
|Minimum permissible load on the channel||1 Ohm|
|Minimum permissible load in a bridge connection||2 Ohm|
|Input SPL||6-0.2 V|
|Low Pass Filter||35-250 Hz|
|Subsonic Filter||10-50 Hz|
|Bass Boost||0-9 dB|
|Input Terminal||0 Ga|
|Output Terminal||8 Ga|
|Fuse Rating||200 A|
|Working Voltage||9-15 V|
|Dimensions (L x W x H)||400x254x64.5 mm|
Power without compromise!
Amazing specifications of bridgeable single-channel amplifiers allow increasing the power to extreme values!
Monoblock from 2000 Watts can easily do all the tasks, be it loud everyday project or SPL competition audio system, aimed at getting record results!
1 Review Hide Reviews Show Reviews
I swapped out my original amp, a B-2 mono 2K, for this Russian built with a Korean board Def Bonce AAK 2000.1. The B-2 had shut it self off without going into any level of protection mode. After the second time I was looking for a replacement and Tyler suggested the def bonce 2k amp. This thing is a freaking hammer, I’ve never heard my B-2 subs sound so good. They never hit this hard before and sound fuller and richer through all types of music. The amp only has a few hours on it, but we pounded on it pretty much the whole time and it never went into any type of protection. According to its onboard thermometer, it never got above 103 degrees.
I feel like my stereo is finally playing to its potential, I hope this little “rusky Kim chi perogi” can continue smelling sweeter than danish.