Product Description
"
B2 Audio ZERO 12K Watts 1-Ohm Monoblock Class-D Half Bridge Korean Amplifier
This Listing Includes:
- (1) 9000W 1-Ohm Class-D Half Bridge Amplifier
Prepare to unleash the full force of sonic domination with the B2 Audio ZERO 12K Watts Monoblock Amplifier. This isn't just an amplifier; it's a relentless powerhouse engineered to obliterate the competition and elevate your audio experience to unprecedented levels of intensity. With a jaw-dropping 12,000 watts of power at 1 ohm, this Class-D Half Bridge Korean amplifier is the epitome of brute force and precision engineering. Whether you're a seasoned car audio enthusiast craving ear-splitting volume or a professional sound engineer seeking uncompromising performance, the B2 Audio ZERO 12K Watts Amplifier delivers the thunderous bass and crystal-clear highs you demand. Dominate the streets, the stage, or the stadium with unrivaled authority. It's time to unleash the beast within your sound system.
Wattage (Measured @ <1% THD [40hz] Using Audio Precision):
- Total Watts: 12,000 Watts
- Dynamic rated power (Music / SPL Burp): 20,000W @ 12.5V
12.6 V <1% THD
- RMS Power @ 4 ohm: 3200 Watts
- RMS Power @ 2 ohm: 5800 Watts
- RMS Power @ 1 ohm: 9500 Watts
13.8 V <1% THD
- RMS Power @ 4 ohm: 4000 Watts
- RMS Power @ 2 ohm: 7000 Watts
- RMS Power @ 1 ohm: 11000 Watts
14.4 V <1% THD
- RMS Power @ 4 ohm: 4000 Watts
- RMS Power @ 2 ohm: 7500 Watts
- RMS Power @ 1 ohm: 12500 Watts
16 V <1% THD
- RMS Power @ 4 ohm: 4500 Watts
- RMS Power @ 2 ohm: 8200 Watts
- RMS Power @ 1 ohm: 14000 Watts
Specifications:
- Circuit Configuration: HI-EF Class-D
- Frequency response: 10 Hz - 300 Hz
- Signal to Noise Ratio: > 95 dB
- Input Sensitivity: 5V - 0.2V
- Crossover Circuit: 24 dB / OCT
- Low Pass Crossover: 35 Hz - 250 KHz
- Subsonic Crossover: 10 Hz - 50 Hz
- Phase: 0 - 180
- Damping factor: > 400
- Power Terminal Gauge: 0 GA
- Speaker Terminal Gauge: 4 Ga
- Fuse Rating: 1000A
Measurements:
- Length: 31.5"" / 80 cm
- Width: 12.4"" / 31.5 cm
- height: 2.95"" / 7.5 cm
"
